How To Read A Tape Measure

When you are ready to shine your creative mind in the field of fashion designing,building skyscrapers, remodeling adress, reconstruction of house you need a measuring tape and the next possibility of knowing How To Read A Tape Measure. Reading a measuring tape accurately requires a little mathematical calculation which we all have undergone in our school days even though math was not astronger subject, measuring tapes are used to counter length of any material or product.

A measuring tape follows both measurements inches and meters so it’s your wish which side to roll on, tape measures are the most common tools used today they are available in variety of materials plastics, fiber, glass, cloth and metals. Tape measures comes in bothunits inches and feet, metrics. Tapemeasures comes varying from 6’ to40’ and even larger. Larger types are used for big projects like constructing buildings,mills, dams, floor construction whereas smaller tapes are used fordesigning, stitching, remodeling clothes or hanging art work.

Below are some important steps to learn how or read a tape measure.

1. As you will look at the measuring tape you will find numbers written in big and small, on standard tape measure the biggest marking is an inch and the smallest ones are centimeters and millimeters.
2. As the increment increases so does the lengths of the marks on inches.
3. Suppose if you have to read an inch you will find a bold 1 written on the measuring tape and the largest space from that place to the next number is an inch which is called one inch.
4. To read one half inch see carefully at the space extended between one inches there you will find high mark called as one half inch.
5. The remaining markings also follows the similar pattern ¼” is half of ½”, 1/8” is half of 1/4” and so on.
6. When you have to measure any length just extend your measuring tape and when the length readingis taken mark it with chalk on it.
7. A measuring tape leads you to read two types of unit for same length so you can read it into inches and meters.
8. How to read a tape measure in meters or centimeters when you are not working with inches? On every measuring tape the smaller ones are meters and centimeters. Every cm has 10 mm and every 100 cm is one meter so while reading a tape remember the little big line extends from 0 to one which is called as 1 cm and the shorter line in between of the are millimeters.

TIPS: HOW TO READ TAPE MEASRURES                                                         

• Try to keep the tape straight as possible while measuring for an accurate reading.
• When you are done with measurement mark it with ‘V ’instead of drawing line as v mark is placed pointing to the exact length.
• While glancing at the measuring tapeyou may go little dizzyas as there are numerous short lines to disturb your concentration while making an accurate measurement.
• After finishing your measurement job do not just roll the tape too fast reel it slowly and firmly so that you may not hurt your finger.

Seeking how to read a measuring tape is a major asset tocarry in your mind whilst measuring lengths and breadths of the curtains, sheets, suitings, shirtings and other products, above mentioned approaches will prove to be quick and easy to ascertain the information you may be covering while working on any projectrelated to calculations and measurements.